By Ben Greenwood

Air compressors are typically associated with commercial and industrial usage; indeed, they are commonly found in hospitals to power various equipment and on building sites to provide the force needed to power heavy duty equipment such as pneumatic drills. However, air compressors also have a wide range of uses in a home environment and should be considered by anyone with an interest in DIY.

While all air compressors essentially do the same job – sucking in air and compressing and pressurising it for kinetic energies – there are hundreds of different models on the market, all offering different features and specifications. Finding the right one for you in such a crowded market can be daunting, especially if you are a first time buyer. Nevertheless, you can make the process a lot easier for yourself by making a few basic considerations.

The first is quite obvious, but one that can be overlooked in the excitement of buying a new piece of equipment – do you actually need an air compressor? Air compressors in the home tend to be for serious DIY enthusiasts, so if you are just doing a quick weekend job then it might be worth borrowing tools or a compressor rather than making an investment. If you are serious about DIY however, then it is well worth looking into buying a compressor rather than other tools. Air tools provide more power than their electric counterparts and the lack of electric means you don’t risk any nasty shocks!

Once you’ve decided to buy a compressor, you need to consider what you are going to be using your compressor for. Typical household uses for air compressors include DIY tasks, tyre inflation, pressure cleaning and air brush painting. On the whole, most homes will only require a small compressor as most household DIY only requires one tool at a time and you will only be using a comparatively small volume of air.

The portability of smaller compressors also makes it advantageous for home usage, as you can move it to various locations around the house to complete your tasks. Smaller compressors also put less of strain on the electric supply of a home, meaning that you avoid any nasty surprises on your electric bill at the end of the month!

There are a couple of instances when larger compressors should be considered for the home. If you have a workshop, for example, you’ll be using the compressor on a regular basis and made need the kind of power only a larger model can provide. Similarly, if you work in your garage on painting projects quite a lot, such as spraying a car, you will need a compressor that can deliver a consistent sustained supply. If you do need a larger compressor, consider the space it will take up. Larger compressors generally aren’t portable and you’ll have to find a large space to house it in permanently.

Other considerations include choosing between oil and oil free models and the length of warranty you’ll require – the best bet for making these decisions to talk to your local specialist, who will be able to talk you through specific models based on your requirements. For general air compressor selection tips, however, you can’t go far wrong by sticking to those listed above.

About the Author: Ben Greenwood is writing on behalf of

Excel Compressors

, specialists in

portable air compressors

Source:

isnare.com

Permanent Link:

isnare.com/?aid=1660863&ca=Advice

January, 2015 byadmin

After being involved in an auto accident, chances are the car sustained a dent or two. Fortunately, the damage does not look too bad, and there is a good chance of being able to get rid of the dents with a little work. Here is what the car owner needs to understand about the process of Dent Repair in Falcon CO.

Assessing the Scope of the Damage

The first step in Dent Repair in Falcon CO, focuses on understanding the extent of the damage. The professional will examine the dented area from all sides and make sure it is possible to make repairs rather than having to replace an entire section of the vehicle. As long as the dent did not actually break anything, the odds of being able to make the car look as good as new are very high.

Working Out the DentThe professional will use equipment to perform a process known as roughing out. This means using hammers and other tools to slowly pop the dent out. With some types of materials, suction equipment will be all it takes to pop the dent out. Once that task is done, the professional can move on to addressing the cosmetic repairs needed.

Grinding and Filling

Since the paint job was likely damaged, the professional will grind away the paint and check to see if any type of filler is needed to smooth the surface of the metal. Once the filler is dried, it is also sanded to ensure the surface is clean and smooth.

Painting the Area

The last step in the dent repair process focuses on applying a new coat of paint to the metal. The actual application may not take that long, depending on the number of dents involved. What will take a little longer is drying the paint so that it creates a protective coating for the metal. Once the paint is thoroughly dry, the owner can reclaim the vehicle and get back to his or her normal routine.

For any car owner who has recently sustained dents to his or her vehicle, visit the team at The Body and Fender Shop. They can assess the damage, and provide a quote for the repairs. In no time, the car will look good as new.