byadmin

A comfortable working environment is essential to the well-being and functioning of the staff members in many industries, ranging from manufacturing to retail. For this reason, it is critical to ensure that quality Commercial Air Conditioning Systems Honolulu are installed in all commercial establishments. Air conditioners help to keep indoor environments at a manageable level. To make sure an air conditioning unit is installed correctly, it is important to hire the services of a certified air conditioning contractor.

A competent AC technician has an adequate understanding of the various types of commercial air conditioning systems. They can help one to choose the right AC unit that suits well with their needs and ensure it is installed correctly. The following are the three critical steps followed when installing a new commercial air conditioning system.

Step 1: Evaluation and Measuring

The process of installing a new commercial air conditioning unit starts with evaluation and measuring the building. The AC technician will profile the cooling needs based on factors such as the number of stories, the level of insulation, the number of rooms and occupants, floor plan, types of doors and windows, and daytime heat gain. After the evaluation, the AC technician will determine the best type of air conditioner to install in the commercial establishment.

Step 2: Inspecting the Ductwork

If the ductwork in the commercial building has been in existence for long, it may have to be replaced before installing the AC unit. Ducts should be wide enough to accommodate the volume of air delivered to indoors. Additionally, planning the system with clean lines helps to make sure that air travels in a straight line. View website for more info.

Step 3: Installing the Air Conditioning System

A certified air conditioning technician will follow all the given instructions while installing the AC unit. They will ensure that the device is installed in the right position to ensure it operates efficiently.Acquiring new Commercial Air Conditioning Systems Honolulu is a big investment. Thus, it is vital to hire an experienced air conditioning contractor to do the installation. For additional details about professional commercial air conditioning services and how to contact a reputable AC company, please go to Airsourceac.com.

4 Points to Ponder About When Choosing a UPS

by

Ray.DWhen it comes to choosing the right uninterrupted power supply (UPS), there is a lot of confusion regarding the zeroing in on the right one. How to select the right one? What is the criteria to select the right one? Here we are going to discuss the parameters you may want to consider while selecting a UPS.

1. Requirement:

The first question you need to ask yourself before you select a UPS is: what is the requirement? Or what equipment are you going to connect to so it gets uninterrupted power supply? A UPS system for a home computer or a small system will require a smaller UPS. There is no point in spending too much money and space on a huge UPS when you need to draw only a small amount of power. A larger set up such as a large or medium scale data center or industrial setup will need a larger UPS or many large UPS, because loss of power in such setups can mean a huge loss of revenue in business. There are also Network UPS systems suppliers who supply UPSs targeted towards managing power supply toward networking devices such as LAN and WAN servers and so on. Power UPS systems are for the large scale devices where it is totally unacceptable to have power cuts/ Therefore, before you select an UPS capacity and load, you must select the right UPS for the right purpose.

2. Capacity:

This is the second crucial factor you must consider before you finalise a UPS. There are two ways of representing an UPS: Wattage (W) and Voltage-Amperes (VA). In case of alternating current, they are not the same. The relationship between them is Watts = Volts x Amperes x power factorWhere Power factor is ratio between Real power and apparent power. So that means Watts is the real power and Volt-Ampere is the apparent power. What is important to understand if that the value of Power factor is hardly ever 1.0. Most of them come with a value of 0.8. So a 1000 VA or 1 kVA UPS can deliver only about 800 W of power. With the advancements in technology, today’s UPS’ offer a power factor of 0.9. Going by that, to select the right size of the UPS, select the highest data center load and add some buffer to it. Then pick the next standard-size UPS.

3. Load:

Now that we have calculated the capacity of the UPS and are aware of the logic behind it, we should also consider the amount of load our intended UPS is going to take. It would be colossal waste of energy and money if a high load UPS works on low loads.

4. Future plans:

So, to avoid the discrepancy between the actual load and intended load, it is recommended to use modular UPS. Modular UPS systems are the latest trends in UPS where only a portion of the capacity is used till more is required. As and when there is need for higher supply of power, the extra capacity is activated via software or firmware. And although this service is chargeable, it is good investment because it saves energy and avoids incessant expenditure on UPS. Therefore, modular UPS allow for scalability in growing businesses.

Selecting the right UPS for the right purpose goes a long way towards ensuring optimum performance of the devices operating alongside the UPS – it saves energy, money and protects the device and the UPS from harm.

I have been into industrial equipments for years. So can’t keep myself from sharing the knowledge. More such articles on

blog

Article Source:

eArticlesOnline.com}

byAlma Abell

A flood is one of the worst things that can happen to a person’s home. Unfortunately, every year, thousands and thousands of homes have to deal with severe flooding. However, the actual water that enters a person’s home isn’t the main thing that people have to worry about. The real damage occurs after much of the water has subsided. This is when mold begins to grow and slowly ruins the integrity of a home’s structure.

In order to avoid the growth of mold throughout, a home a homeowner needs to act fast after a flood. One of the first things a person will want to do is turn off the power of their home and unplug any and all appliances. Allowing the power to remain active in a home could lead to an electrical fire that could cause more damage. Turning off the power makes it much safer for a person to enter a home and begin removing their items.

The next thing a person will want to do is try their best to get rid of as much water throughout the home as possible. Depending on how much water is left inside of a home, a homeowner might want to consider investing in a water pump. These devices work to pump large amounts of water out of one location and into another. A service for water damage restoration Saratoga offers may provide these devices with their services.

After pumping out the majority of water, it’s time to dry and disinfect the areas inside of your home. Dehumidifiers and fans can be used to remove moisture throughout the home, and a wet vacuum can be used to dry carpets and wooden floors. A service for Water Damage Restoration Saratoga offers can work to dry and effectively disinfect all areas of your home to avoid the growth of mold.

These are just a few of the steps people might take in order to save their homes after a flood. Again, it’s important to remember that electricity and water don’t mix. Turn off the power of the home before beginning the restoration process. Call a Professional Fire Restoration Service or water restoration service if you feel that the damage done to your home is simply too severe.